Creating a New Diagram Use any of the following options to open the template dialog: - Select New from the file menu.
- Enter the keyboard shortcut Ctrl + N
You can create a new diagram by selecting one of the templates and press OK. To create a new blank diagram press Ctrl + B or select New Blank Diagram from the file menu.
Paper Size
Click the Page button on the Home tab toolbar. Use the pull down box to select your paper size.
Paper Orientation
Click the Page button on the Home tab tool bar. Click the Landscape or Portrait buttons to select the paper orientation.
Page Bleed Page Bleed is used when printing the diagram. A small amount of overlapping at the edge of each tile makes it easy to put adjacent tiles together after printing and allows the pages to be trimmed to correct printing errors. Click the Page button on the Home tab toolbar. Use the slide bar to adjust the size of the bleed.
Scaling Scaling is used to change the printed size of a chart already designed. Setting the scale will change line width and text height, be careful not to make your diagram unreadable. Click the Page button on the Home tab toolbar. Use the slide bar to adjust the scale.
Line Jumps Line jumps are the arcs drawn when one connector crosses other connectors in the canvas. Click the Page button on the Home tab toolbar. Tick the checkbox to enable for whole document. Option to enable per connector is also available in Line dialog. Line jumps are only available for Straight and Orthogonal connectors. |