Main output (Left / Right)

This is where you set the sound card channels for your main output. In a performance situation you would select the outputs connected to your front of house speakers. This is what the audience will hear. If an ASIO device is selected, the setup button is enabled for opening the ASIO setup panel.

Headphone output (Left / Right)

This is the sound output that is used when you click on the headphones button in the play controls section.

For the headphones output, you should select different output channels from the ones selected for your main output. In a performance situation, you would select the output channels of your sound card connected to your headphones. This enables you to make changes to a particular deck (such as cueing or applying effects) without the audience hearing the changes until you're ready.

Use a separate device for headphone output

If you don't have a sound device with 4 channels or more, you can select a second sound device for your headphone.

Microphone

Microphone Device

If you have more than one microphone device installed, use this list to select the one you want to use.

Input Channel

Use this pull down list to select the input channel for microphone. The recommended setting is "Microphone" or "Mic-In". If you have problems using the mic-in setting, select Windows Record Mixer and open the Windows Record Mixer to manually adjust settings.

Microphone Volume

Adjust the volume using this fader.

If you have selected Windows Record Mixer, you can click on the button "Open Windows Record Mixer" for manual mixer settings.