Debut allows the user to edit the input frame whenever the camera inherently allows it. For example, to zoom the camera (if the camera supports it), simply go to Options >> Video Tab >> Device Settings... (either for Webcam or Capture Device) >> Camera Control Tab and move the Zoom slider. Video Proc Amp
These properties whenever supported control the quality of the input frame
- Brightness
- Contrast
- Hue
- Saturation
- Sharpness
- Gamma
- White Balance
- Backlight Comp
- Gain
- ColorEnable
- PowerLine Frequency(Anti Flicker)
Camera Control
These properties are related to the control of video cameras
- Zoom: Controls a camera's zoom setting
- Focus: Controls a camera's focus setting
- Exposure: Controls a camera's digital exposure time
- Aperture(Iris): Controls a camera's aperture setting
- Pan: Controls a camera's pan setting
- Tilt: Controls a camera's tilt setting
- Roll: Controls a camera's rotation setting
- Low Light Compensation
Note: If there is no sound detected on your external device. Please check your system sound to confirm your device is properly connected to Windows or you can open the Volume Mixer from the speaker icon to check if your device is on the list.
Another workaround is to do the following:
- Open Sound Settings/Related Settings/Sound Control Panel/Recording tab/Line/Properties/Listen tab/Check "Listen to this device"
- If above still does not work, you need an RCA to 3mm adapter. Attach the white/red connector to your camera then connect it through your computer. If you are using a mono source, the white connector is the audio.